Tiedowns

Here is a couple pictures of the tie down brackets that I made. The angle iron pieces go into the wall, and the flat iron pieces will go on the bottom of the wing of the camper. The bottom pieces will act as a guide for the eylets, that's the idea for now anyway. I might have the eyelet welded to the iron plate just to make it more permanent. However this way, if I do ever break something, I can replace it without major repair. I screwed and glued them in today. You can also see the wiring of the wall that will go to the inverter. I'm using 14guage wire. Oh yeah!!!

Siding, Electrical

Here are a couple pictures of the walls after I put the luan siding on, and installed the wiring. One side of the camper is for AC power only, while the other is DC only. I will be installing two LED lights for the main area, and a reading light for the cabover. The AC wall has two outlets for the fridge, microwave and tv. Plus two lights as well, one will be a big florescent light, and another for the cabover section. Wow , I'm running out of room in the garage. Also ifyou look past the walls, sitting on the camper is 1200 bucks worth of alum siding...